Easy Guide to Installing a Stainless Steel Dishwasher Wrap

Simple Steps to Attach a Stainless Steel Dishwasher Cover Panel

Stainless steel appliances are highly preferred for their sleek and modern aesthetic. To achieve a cohesive look in your kitchen, you can enhance your existing dishwasher with a stainless steel cover panel instead of purchasing a new, expensive unit. This affordable upgrade allows you to match your refrigerator and stove, elevating your kitchen's style without a hefty price tag. Here's a straightforward guide to help you install a stainless steel cover panel securely over your current dishwasher.

Follow these steps to properly attach a stainless steel panel over your existing dishwasher.

Step 1
Lightly apply a small amount of gentle dish soap to a damp cloth and clean the entire dishwasher surface to remove grease, dust, or stains.

Step 2
Measure your dishwasher's height and width using a tape measure. Add half an inch to each side of your measurements to accommodate the panel. Cut the stainless steel film to match these dimensions, adding an extra inch for safety.

Step 3
Wipe down the dishwasher’s surface with a damp sponge, ensuring it remains moist to promote proper adhesion of the panel.

Step 4
Peel off the backing from the stainless steel panel film. Carefully position it onto the front of the dishwasher, starting from the center and pressing outward to the edges for a smooth, bubble-free fit.

Step 5
Use a squeegee to eliminate air bubbles, starting from the center and moving toward the edges to ensure an even finish.

Step 6
Place a ruler along each side and use a straight razor to trim the excess film, cutting precisely 1/2 inch beyond each edge of the dishwasher. Repeat on all sides for a perfect fit.

Step 7
Finish by wiping the surface with paper towels to remove any residue and ensure a polished look.